Pressure reducing valve with filter and transparent bowl 1/2"

Pressure reducing valve D06F  Resideo (Formerly Honeywell), with pressure gauge scale R 1/2 - Kvs 2.4, for water up to 40 ºC, compressed air, and nitrogen. Balanced seat. Stainless steel filter and transparent bowl. Brass body. Spring housing, control head, and internal elements made of high-quality synthetic material. Maximum inlet pressure 16 bar. Outlet pressure 1.5 - 6 bar. Complies with EN 1567 standards. According to EN 802-2, pressure reducing valves of this type protect domestic water installations from excessive supply network pressure. They can also be used for industrial and commercial applications within their specification. By installing a pressure reducer, damage from overpressure is avoided and water consumption is reduced. The established pressure remains constant even when there is a wide fluctuation in inlet pressure. The reduction in operating pressure and maintenance at a constant level minimizes noise in the installation. Pressure reducing valve with balanced seat and control adjustment.

Main features:

- Medium: drinking water

- Nominal diameter: 15 mm

- Internal/External Connection: set with external thread

- Adjustable pressure range: 1.5 ... 6 bar

- Max. working temperature: 40C (70C for max. pressure 10bar)

- Flow Kvs: 2.4

- Body material: brass, resistant to zinc loss

- Spring material: synthetic material

- Integral filter: 0.16mm

- Filter bowl: transparent

- Adjustable scale: Yes

- Design with balanced seat: Yes

- Balanced inlet pressure - variations in inlet pressure do not affect outlet pressure

- Up to 1 1/4" approved by TUEV LGA for low noise, Group 1 without limitations

- Internal elements are made of corrosion-resistant plastic and can be replaced

- Outlet pressure is adjusted using the green control

- The selected pressure is displayed on the adjustment dial

- The adjustment spring is not in contact with drinking water

- Integrated fine filter

- Also available without fittings

- In accordance with BSEN 1567

- All materials in accordance with UBA

- All materials have ACS approval

- Size: 1/2 inch

- Max. inlet pressure: 16 bar

- Pre-set outlet pressure: 3 bar

- Min. pressure loss: 1 bar