Reflex Circuit Breaker iC60N TI24 10A 2P Curve C

This Acti9 Reflex iC60N is an integrated low-voltage control circuit breaker. It is a 2P circuit breaker with protected poles, a rated current of 10 A, and a C tripping curve. As a switch, its breaking capacity, according to IEC/EN 60947-2, is 20kA at 220VAC to 240VAC, and 10kA at 380VAC to 415VAC. As a circuit breaker, it protects circuits against short circuits and overload currents, disconnection in the industrial sector. It can remotely control a device by means of a latch and/or impulse order according to the 2 operating modes chosen by the user. The reset after a fault is done manually via the reset lever. The Ti24 interface allows direct interconnection of the Reflex iC60 with a PLC. It enables remote control execution, indicating the control circuit status and circuit breaker status information, to connect it to the Smartlink Acti9 thanks to prefabricated cables. The electrical endurance goes up to 50000 cycles. Mechanical endurance is up to 50000 cycles. The insulation voltage with Ui rating is 500 V AC. It can be mounted on a DIN rail for modular installation. Its width is 9 modules of 9mm. The product colour is white (RAL9003). The dimensions are (W) 81 mm x (H) 84 mm x (D) 77 mm. It has an IP20 protection rating (according to IEC/EN 60529) at its terminals. It becomes IP40 once in a modular enclosure with class II insulation.