C120N 3P 100A Curve C Circuit Breaker

The Acti9 C120N low-voltage thermal-magnetic circuit breaker from Schneider Electric ensures protection against overloads and short circuits in all industrial and commercial buildings. This product features 3 poles, a capacity of 100A, type C tripping curve, and a breaking capacity of 10kA 230 to 240V AC 50/60Hz (IEC 60898) or 20kA 230 to 240V AC 50/60Hz (IEC 60947-2). This thermal-magnetic breaker is designed to offer a high level of industrial performance. It has an IP20 protection rating, can be mounted on a DIN rail, and is suitable for industrial isolation according to IEC 60947-2. Additionally, it has a wide operating range, functioning in temperatures from -25°C to 70°C. The product complies with IEC 60898-1, 60947-2 and RETIE standards. The Acti9 C120N thermal-magnetic breakers carry the Green PremiumTM label, which promises compliance with the latest regulations, transparency regarding environmental impacts, circular products, and low CO2 levels. It has electrical endurance of up to 5000 cycles and mechanical endurance of up to 20000 cycles. The operating voltage Ue is equal to or less than 375 V DC, 220 V AC to 240 V AC, 230 V AC to 400 V AC, 380 V AC to 415 V AC, or 440 V AC. The rated insulation voltage Ui is 500 V AC. The frequency is 50 Hz or 60 Hz. The product can be clipped onto a DIN rail. Its width is 9 modules of 9 mm. The pollution degree is 3. The overvoltage category is IV. The product colour is white (RAL9003). The dimensions are (W) 81mm x (H) 81mm x (D) 73mm. The weight is 0.615kg. It has an IP20 protection rating (according to IEC/EN 60529) at its terminals. The operating temperature is -25 °C to 70 °C. The storage temperature is -40 °C to 85 °C.