C120N 3P 125A Circuit Breaker Curve C

The Acti9 C120N low voltage thermal-magnetic circuit breaker by Schneider Electric ensures protection against overloads and short circuits in all industrial and tertiary buildings. This product has 3 poles, a capacity of 125A, type C tripping curve, and a breaking capacity of 10kA 230 to 240V AC 50/60Hz (IEC 60898) or 20kA 230 to 240V AC 50/60Hz (IEC 60947-2). This thermal-magnetic breaker is designed to offer a high level of industrial performance. It features IP20 protection, can be mounted on a DIN rail, and is suitable for industrial insulation according to IEC 60947-2. Additionally, it has a wide operating range, functioning in temperatures from -25°C to 70°C. The product complies with IEC 60898-1, 60947-2, and RETIE standards. Acti9 C120N thermal-magnetic breakers carry the Green PremiumTM label, which promises compliance with the latest regulations, transparency about environmental impacts, circular products, and low CO2 levels. It has an electrical endurance of up to 5000 cycles and a mechanical endurance of up to 20000 cycles. The operating voltage Ue is equal to or less than 375 VDC, 22 VAC to 24 VAC, 23 VAC to 4 VAC, 38 VAC to 415 VAC, or 44 VAC. The nominal insulation voltage Ui is 5 VAC. The frequency is 5 Hz or 6 Hz. The product can be mounted on a DIN rail. Its width is 9 modules of 9mm. The pollution degree is 3. The overvoltage category is IV. The product color is white (RAL93). The dimensions are (W) 81mm x (H) 81mm x (D) 73mm. The weight is 0.615 kg. It has a protection degree of IP2 (according to IEC/EN 6529) at its terminals. The operating temperature is from -25°C to 70°C. The storage temperature is from -40°C to 85°C.