Tropicalised DIN Rail Mounted Current Transformer 600 5 Wires d. 40 Bars 12x50 20x40

Technical Description

Schneider Electric PowerLogic current transformer for indirect measurement in electrical distribution installations. It is designed for DIN rail mounting and for installation on cable or busbars, with tropicalized execution for demanding environments.

Applications and Benefits

Recommended solution for metering panels, energy monitoring, and supervision systems where it is necessary to convert high primary current into a standardized secondary signal.

Technical Features

• Transformation ratio 600/5 A, suitable for measuring devices with a 5 A secondary.
• Transformer type: tropicalized closed-core transformer for busbar and cable.
• Suitable for cables with a diameter of 40 mm and busbars of 12 x 50 mm or 20 x 40 mm.
• Rated operational voltage below 720 V AC, 50/60 Hz.
• Rated insulation voltage Ui: 3 kV.
• Maximum safety factor FS 5 and dynamic resistance 2.5 Ith.
• Installation by clip, screws, DIN rail, busbar, or mounting plate.

Dimensions and Physical Data

• Overall width: 70 mm.
• Overall height: 95 mm.
• Total depth: 65 mm; frame depth: 45 mm.
• Approximate net weight: 0.349 kg.

Installation

It must be installed in a suitable electrical enclosure and with the secondary correctly connected to the measuring equipment before energizing the circuit.