ALTIVAR-320C Speed Drive 0.75KW 400V Three-Phase

This Altivar 320 speed drive can power synchronous and asynchronous three-phase motors. Its compact design allows for vertical stacking of drives on machine frames. It operates with a rated power of up to 0.75 kW/1 HP and a nominal supply voltage of 380 to 500 V AC. It includes suitable functions for the most common applications, including precise torque and speed at very low speeds, high dynamic performance with sensorless flux vector control, and a wide frequency range for high-speed motors. It also incorporates parallel connection of motors and special drives using the voltage/frequency ratio and static speed accuracy, along with energy savings for open-circuit synchronous motors. The drive software includes five safety functions that help machines meet safety requirements, regardless of whether they are used with a Preventa safety module. It is mainly found in the construction, food and beverage, and chemical sectors. It is designed for use in the most common applications for centrifugal machines, pumps, fans, compressors, and conveyors, mainly found in the construction, food and beverage, and chemical sectors. It complies with IEC/EN 60947-4-2 standards and is CE, UL, CSA, DNV, C-Tick, GOST, CCC, NOM, SEPRO, and TCF certified. The Altistart 48 connects directly to the Modbus bus via its RJ45 connector port. It can also connect to Ethernet, Fipio, Profibus DP, and DeviceNet networks through a module (bridge or gateway) that must be ordered separately. It is designed to be mounted vertically (+/-10°) on a panel using its 4 mounting holes. Altistart 48 offers excellent performance thanks to its torque control system (TCS) for controlled start and deceleration, and a in