Haier Hydro All-In-One R290 10 kW 200 Liter Aerothermal Set - Three-Phase

The Haier Hydro All-In-One R290 10 kW 200 liters – Three-Phase combines an indoor module with a high-quality domestic hot water tank and an outdoor unit equipped with natural refrigerant R290. This all-in-one system provides heating, cooling, and domestic hot water with maximum efficiency, reaching a flow temperature of 80 °C without the need for an electric heater and operating stably even at −25 °C.

Set Composition

• Indoor unit: HU102F20AHYAE3 with a 200-liter tank made of duplex stainless steel 2205.
• Outdoor unit: AW10NHUGHA with DC Inverter Twin Rotary compressor and R290 refrigerant.

Functions and Control

• 2-zone control for heating or cooling with independent temperatures.
• Climate curves that adjust water temperature based on outdoor temperature.
• Automatic mode switching between heating and cooling according to indoor demand.
• Smart Grid with dynamic power adjustment in response to the electrical signal.
• Integrated solar thermal management and DHW.
• Pool function with water temperature control.
• Automatic antifreeze to protect the system in cold climates.

Performance (10 kW 3 Ph)

• Heating 35 °C / 7 °C: 10.00 kW · Input 1.96 kW · COP 5.10.
• Heating 55 °C / 7 °C: 10.00 kW · Input 3.13 kW · COP 3.20.
• Cooling 18 °C / 35 °C: 9.50 kW · Input 2.21 kW · EER 4.30.
• Cooling 7 °C / 35 °C: 8.50 kW · Input 2.62 kW · EER 3.25.
• Outdoor operating ranges: heating −25~35 °C · cooling 10~48 °C · DHW −25~43 °C.

Integrated DHW

• Volume: 200 liters · duplex stainless steel 2205.
• Load profile: L · COP 3.13 · Class A+ in DHW.
• Storage temperature: 25~75 °C.
• Tank heater: 3 kW.

Hydraulics and Temperatures

• Heating water: 20~80 °C.
• Cooling water: 5~25 °C.
• Hydraulic connections: supply/return R1 · DHW inlet/outlet R3/4.
• Expansion vessel: 8 L · safety valve 3 bar.

Electrical Data and Protection

• Power supply: 380–415 V · 3 Ph · 50 Hz.
• Indoor unit: Imax 14.1 A · recommended circuit breaker 20 A.
• Outdoor unit: Imax 6.2 A · recommended circuit breaker 16 A.
• Auxiliary indoor heater: 1 + 2 kW (2 steps) · Imax 5 A.

Refrigerant and Sound Level

• Refrigerant: R290 · charge 0.9 kg (CO₂eq 2.7 t).
• Indoor unit sound level: 40 dB.
• Outdoor unit: pressure 49 dB(A) · power 60 dB.

Dimensions and Weight

• Indoor unit: 1780 × 590 × 590 mm · weight 115.5 kg (gross 131.5 kg).
• Outdoor unit: 790 × 1250 × 380 mm · weight 113 kg (gross 136 kg).
• Packing: indoor 2060 × 695 × 695 mm · outdoor 1022 × 1395 × 550 mm.

Power Selection (Guideline)

Size according to the building’s thermal load:

• 30–40 W/m² (well insulated): approx. 130–160 m².
• 50–60 W/m² (medium insulation): approx. 90–110 m².
• 80–100 W/m² (poor insulation): approx. 60–75 m².

Indicative values: confirm with load calculation and type of intended emitter.

Main Advantages

• All-in-one: less space required and easy installation.
• High efficiency with natural R290 refrigerant.
• Hot water up to 80 °C without electric heater.
• Consistent performance even in extreme outdoor temperatures.
• Robust, modern, and quiet design ideal for three-phase residential applications.

Installation and Safety Notes

• Installation by a qualified technician with appropriate electrical protections.
• R290 (A3, flammable): comply with applicable safety and ventilation regulations.
• Use compatible antifreeze and properly purge the hydraulic circuit.