ECOAIR DLC Bathroom Extractor (90-260V 50/60HZ) RE

Domestic centrifugal fans designed to operate with 2 different modes: Continuous operation at adjustable low speed, and at high speed controllable via an external or internal switch, depending on the model. Intermittent operation at adjustable speed. Equipped with a high-performance, low-consumption brushless EC motor with an external rotor, powered by 230V-50/60Hz, IPX4 protection, Class II insulation, with ball bearings, mounted on elastic silent-blocks. They can be installed on either walls or ceilings, connected to ducts of Ø 100 mm. 5 models available. ECOAIR SLC: Continuous operation: the extractor operates at the adjusted low speed and can switch to high speed via an external switch. Intermittent operation: the extractor starts at the adjusted speed via the external switch. ECOAIR TLC: Continuous operation: with the same operation as the SLC model, adjustable timing for high speed, between 1 and 30 minutes. Intermittent operation: the timing allows the extractor to continue running once the switch is activated. ECOAIR HLC: Continuous operation: the switch to high speed occurs automatically when the humidity level in the room exceeds the adjusted value. It can be activated via an external switch. Includes timing. Intermittent operation: the extractor starts automatically when the humidity level in the room is above the adjusted value. It can be activated via an external switch. Integrates timing and interval function. ECOAIR MLC: Identical operation to the HLC model, but with an integrated pull cord switch instead of an external switch. ECOAIR DLC: Continuous operation: the extractor switches to high speed via a PIR detector and continues to operate for the time set by the timer. Intermittent operation: the extractor starts automatically when it detects movement through the PIR and continues to operate according to the time set by the timer.