Evacuation Pump for Air Conditioning SFA Sanicondens Clim Pack S

The SFA Sanicondens Clim Pack S evacuation pump, reference SETKCLIMPACK3, is an efficient and easy-to-install solution for the evacuation of condensate in air conditioning systems up to 10 kW. This system is designed to evacuate condensation water generated by air conditioners, providing reliable and quiet operation, ideal for residential or commercial environments where comfort and low noise levels are prioritised.

One of the key features of the Sanicondens Clim Pack S is its pre-installed duct, which allows for quick and easy installation. This duct is reversible, facilitating the placement of the evacuation system on either the left or right side of the air conditioning unit, offering flexibility and versatility to suit any type of installation. This ease of installation makes it an ideal choice for air conditioning projects that require a quick and efficient solution for condensate evacuation.

The operation of the Sanicondens Clim Pack S is fully automatic. Like its similar version, the Sanicondens Clim Mini S, this model uses a float system to detect the level of condensate in the detection block. When the condensate enters the block by gravity, the float rises, activating the pump motor. The motor draws in the condensation water and evacuates it, then the float lowers and the motor automatically shuts off, preparing the system for the next cycle. This automatic cycle ensures continuous and efficient operation without the need for manual intervention.

The pump is designed to operate extremely quietly, with a noise level of only 21 dB(A), making it practically imperceptible during operation. This low noise level is especially important in residential or commercial environments where acoustic comfort is a priority, such as in offices, bedrooms, or living rooms.

The Sanicondens Clim Pack S has a maximum flow rate of 9 litres per hour (+/- 15%), ensuring it can effectively handle the condensate generated by an air conditioning system of up to 10 kW. This makes it a suitable solution for a wide range of air conditioning applications, from small domestic systems to larger commercial units.

The system includes all the necessary accessories for installation, further simplifying the assembly process. With just the connection of the inlets and outlet, the system is ready to operate reliably and continuously. The diameter of the inlets is 16 mm, while the recommended diameter for the return pipe is 8-10 mm, ensuring a quick and simple installation without the need for complex adaptations.

Technical specifications of the Sanicondens Clim Pack S:

• Maximum flow rate: 9 l/h (+/- 15%)
• Inlet diameter: 16 mm
• Recommended return diameter: 8-10 mm
• Power supply voltage: 220-240 V
• Power supply frequency: 50 Hz
• Maximum absorbed power: 22 W
• Protection index: IP20
• Maximum water temperature: 35 °C
• Noise level: 21 dB(A)
• Maximum suction: 2 m (between the detection unit and the pump)
• Possible connections: Air conditioners up to 10 kW

The Sanicondens Clim Pack S is a highly efficient and versatile solution that ensures quick and quiet evacuation of condensate in air conditioning systems. Its low energy consumption, with an absorbed power of only 22 W, guarantees economical operation, resulting in energy and cost savings in the long term. Additionally, its IP20 protection index ensures the system is protected against dust and moisture, guaranteeing its durability and reliability even in demanding environments.