SFA SANIBEST PRO sanitary grinder for high-use bathrooms

The SFA SANIBEST PRO sanitary grinder, reference 0101222, is a robust and efficient solution for high-use bathrooms. This model is specifically designed to operate in demanding environments, such as rental apartments, bars, large offices, and other public spaces where bathroom use is constant and not always controlled. Thanks to its powerful 1100 W motor and its exclusive grinding system, the SANIBEST PRO can handle large volumes of wastewater continuously and reliably, providing exceptional performance even in the most extreme conditions.

This sanitary grinder allows for the evacuation of wastewater from a complete bathroom, including toilet, sink, shower, and bidet. Its design includes four inlets, making it a comprehensive solution for multifunctional bathrooms. The front inlet is designed to connect a horizontally draining toilet, while the top inlet, with a diameter of 40 mm, allows for the connection of one or more sinks. Additionally, it has two lower side inlets, also 40 mm, for connecting one or more showers and/or bidets, making it a versatile option for a wide variety of bathroom configurations.

One of the standout features of the SANIBEST PRO is its evacuation capacity. Thanks to its powerful pumping system, it can evacuate wastewater up to 7 meters vertically or 110 meters horizontally, offering great flexibility for installation in virtually any part of the building, regardless of proximity to the main drain. This makes it ideal for locations such as basements, attics, or areas far from the drainage network, overcoming the limitations of traditional gravity drainage systems.

The SANIBEST PRO is equipped with an evacuation elbow installed on the unit's lid, which includes a non-return valve to prevent backflow of already evacuated wastewater. This elbow is compatible with pipes of 22, 28, or 32 mm, allowing the installation to be adapted to the specific needs of the project. Additionally, this grinder has exceptional performance in terms of flow rate: at 1 meter height, it can evacuate up to 145 liters per minute, and at 5 meters height, it can still manage an impressive flow rate of 103 liters per minute, ensuring optimal performance even in more complex installations.

The SANIBEST PRO is not only powerful but also extremely durable. Its design is prepared to operate for long hours without interruption, making it an ideal choice for bathrooms that receive intensive use. Furthermore, its specific cooling system ensures that the motor remains at an optimal temperature, prolonging its lifespan and ensuring efficient operation even under the highest demands.

Technical specifications of the SANIBEST PRO:

• Number of inlets: 4 (one front for toilet, one top for sink, and two side for shower/bidet)
• Diameter of inlets: 100 mm (toilet) / 40 mm (sink, shower, bidet)
• Recommended return diameter: 22/28/32 mm
• Motor consumption: 1100 W
• Power supply voltage: 220-240 V / 50 Hz
• Electrical class: I
• Protection index: IP44
• Maximum horizontal return: 110 meters
• Maximum vertical return: 7 meters
• Minimum shower tray height: 15 cm
• Maximum flow rate: 145 l/min (at 1 m height), 103 l/min (at 5 m height)

The SANIBEST PRO is not only powerful and efficient but also easy to install. It only requires a water supply and a standard electrical connection, greatly simplifying the installation process. Additionally, its noise level is 46 dB(A), making it a relatively quiet option for a device of its power, ensuring comfortable operation even in noise-sensitive environments.