SFA Sanicubic 2 Pro Smart Brushless Pumping Station

The pumping station SFA Sanicubic 2 Pro Smart Brushless, reference R4BLDCIP68NM, is designed to evacuate wastewater from single-family homes, commercial premises, gyms, or facilities that require reliability and intensive use. Equipped with two brushless motors with 1500 W absorbed power, it offers high performance with low maintenance, evacuating up to 15 m³/h with a maximum head height of 13 meters.

Thanks to its Pro X K2 stainless steel blade system, it can effectively shred waste and evacuate through a Ø50 mm pipe, making it perfect for replacing a conventional sump or septic tank. Its direct-to-floor installation and compact size make it a very versatile option.

It is equipped with a smart control system with radio frequency communication, allowing real-time visualization of the equipment's status from a visible area of the installation: which motor is running, if there is an alarm, or if there is tension in the system. The level detection is pneumatic, without floats, which improves reliability and reduces maintenance.

The motors work alternately and can be activated simultaneously in case of high inflow. If one of the motors stops due to blockage or failure, the other continues to operate to avoid service interruptions.

It has 5 multidimensional inlets (Ø40, Ø50, Ø100, Ø110 mm) and a Ø50 mm vent. It is suitable for evacuating water from toilets, showers, sinks, washing machines, dishwashers, etc. It can pump liquids at 70 °C during intensive use. The evacuation system incorporates a pre-installed non-return valve.

Included Components

• 45 L polypropylene (PP) tank
• 2 brushless motors with Pro X K2 blades
• Smart control panel with radio frequency communication
• Wired alarm
• Discharge elbow with non-return valve

Technical Specifications

• Type of turbine: Pro X K2 blades
• Supply voltage: 230 V
• Frequency: 50-60 Hz
• Absorbed power (P1): 1500 W per motor
• Useful power (P2): 1050 W per motor
• Operating mode: S3 50%
• Protection index: IP68

Hydraulic Data

• Maximum head height: 13 m
• Maximum flow rate: 15 m³/h
• Inlet diameter: Ø40, 50, 100, 110 mm
• Discharge diameter: Ø50 mm
• Ventilation diameter: Ø50 mm
• Total tank volume: 45 L
• Useful volume: 17.5 L
• ON/OFF level: 140 mm / 70 mm
• Alarm level: 210 mm
• Maximum pumped liquid temperature: 70 °C

Identification and Logistics

• Package weight: 35 kg
• EAN code: 3308815085166
• Reference: R4BLDCIP68NM

Main Advantages

• 2 brushless motors with blades for intensive use
• Direct-to-floor installation without the need for construction work
• Remote monitoring with wireless Smart system
• Evacuation through standard DN50 pipe
• Compact, quiet, durable, and without complex maintenance

Optional Accessories

• DIN 40 shut-off valve: Ref. VANNEDN50
• DIN 110 shut-off valve: Ref. VANNEDN100
• Ø50 active carbon filter: Ref. FILTRECUBICSFA

The SFA Sanicubic 2 Pro Smart Brushless pumping station combines advanced technology, power, and safety in a solution designed for demanding evacuations. Ideal for environments where continuous performance and remote control are essential.