SFA Sanicubic 2 SC3.0 T Three-Phase Pumping Station

The SFA Sanicubic 2 SC3.0 T pumping station is a high-capacity professional solution designed to evacuate large volumes of wastewater from public buildings, residential areas, or commercial facilities. Equipped with two powerful three-phase motors of 3000 W each, this unit effectively manages the evacuation of water loaded with solids, even under intensive use conditions.

Thanks to its single-channel turbines and solid passage of up to 80 mm, it can handle flow rates of up to 120 m³/h and reach lifting heights of up to 10 meters. The two pumps work alternately to extend the system's lifespan, but they can also be activated simultaneously if demand requires. This intelligent management is possible thanks to the external control panel ZPS 2 included as standard, which also allows adjusting activation levels and generates alerts in case of any incidents through sound and light alarms.

The Sanicubic 2 SC3.0 T features a 1000-liter tank made of high-density polyethylene (PE HD), with a useful volume of 500 L. It is installed directly on the ground, without the need for excavations, facilitating startup in new projects or renovations. The DN 150 inlet allows collecting all the flow from a building's main downpipes, while the DN 100 pressurized outlet ensures efficient evacuation.

The system is activated by pneumatic pressure switch detection, ensuring immediate start-up without water accumulation in the tank. The station is prepared to operate in S3 mode at 25%, meeting the demands of intensive intermittent operation. Its GG-20 cast iron structure and components made of resistant materials ensure durability and reliability even in demanding environments.

Included Components

• 1000-liter tank in PE HD (useful volume: 500 L)
• 2 three-phase pumps of 3000 W with single-channel turbine
• Single DN 150 inlet and DN 100 pressurized evacuation
• ZPS 2 control panel with cycle recording and alarm system
• Non-return valve and connection fittings included

Technical Specifications

• Motor type: Three-phase (400 V, 50-60 Hz)
• Absorbed power (P1): 4000 W (per pump)
• Useful power (P2): 3000 W (per pump)
• Operating mode: S3 25%
• Protection index: IP68
• Maximum manometric height (HMT): 10 m
• Maximum flow rate: 120 m³/h
• Solid passage: up to 80 mm
• Maximum pumped liquid temperature: 55 °C

Connections and Installation

• Inlet: DN 150
• Evacuation: DN 100 (pressure)
• Ventilation: DN 100
• Detection type: Pneumatic pressure switch
• Gross weight: 370 kg

Main Advantages

• High evacuation flow for buildings or commercial facilities
• Dual pump with alternating or simultaneous activation according to demand
• Total control thanks to the ZPS 2 panel with alarm and level adjustment
• Direct installation on the ground without the need for excavation
• High mechanical and chemical resistance in demanding environments

Compatible Optional Components

• DIN 110 shut-off valve: Ref. VANNEDN100
• DN 100 activated carbon filter: Ref. FILTRECUBICXLSFA

The SFA Sanicubic 2 SC3.0 T pumping station is the ideal solution for high-flow evacuations in facilities with multiple downpipes. Its industrial design, operational reliability, and adaptability make it a safe choice for residential and tertiary projects with high technical demands.