SFA SANIFOS 610 2 VX SP T Three-Phase Pumping Station - Vortex Version

The SFA Sanifos 610 2 VX SP T pumping station is designed for demanding evacuations in large homes, collective buildings, technical facilities, or commercial areas without direct connection to the sewer network. Equipped with two Sanipump VX three-phase pumps with vortex impeller, this station ensures high flow rate and maximum hydraulic reliability under intensive use conditions.

The system includes the Smart Control panel as standard, allowing automatic operation via level switches, activating the pumps alternately or simultaneously depending on the water level. Its flow capacity reaches 29 m³/h, with a maximum head of 17 m, enabling efficient evacuation at great heights or long distances.

The vortex pumps allow free passage of solids up to 50 mm without the need for grinding, minimizing the risk of blockages and facilitating maintenance. The entire hydraulic system comes pre-assembled, with non-return valves and shut-off valves for each pump, speeding up installation.

The tank, made of high-density polyethylene (HDPE), has a total volume of 610 L and a usable volume of 170 L. Its bottom is designed to prevent residue accumulation, and the hermetically sealed threaded lid supports up to 200 kg of point load, ideal for outdoor or trafficable areas.

Included Components

• 610 L HDPE tank with anti-sedimentation bottom
• 2 Sanipump VX three-phase pumps with vortex impeller
• Smart Control panel with display and operation history
• Complete hydraulic kit with valves and shut-off keys
• 2 sealing gaskets (DN50 and DN100)
• 2 stainless steel chains for pump lifting

Technical Specifications

• Pump Type: Sanipump VX (vortex)
• Power Supply Voltage: 400 V (three-phase)
• Operating Mode: Automatic (alternation/simultaneity)
• Detection: Level switch

Hydraulic Data

• Maximum Head: 17 m
• Maximum Flow Rate: 29 m³/h
• Inlet Diameter: Ø50/100 mm
• Discharge Diameter: Ø63 mm
• Ventilation Diameter: Ø75 mm
• Solids Passage: up to 50 mm

Tank and Dimensions

• Total Volume: 610 liters
• Usable Volume: 170 liters
• Alarm Level: 570 mm
• Lowest/Highest Inlet Point: 325 / 670 mm
• Maximum Pumped Liquid Temperature: 70 °C
• Gross Weight of the Set: 115 kg

Main Advantages

• High-volume evacuation in collective or technical installations
• 2 three-phase vortex pumps for intensive use with 50 mm free passage
• Reinforced and weather-resistant tank with hermetic lid
• Intelligent control with incident history and alarms
• Simplified installation with pre-assembled hydraulic system

Optional Accessories

• Wired Alarm: Ref. 009FOS280AL
• 40 cm Extension Module: Ref. RO250100

The SFA Sanifos 610 2 VX SP T pumping station is the most complete option in its range for evacuations in high-flow and technical demand environments. Its robustness, evacuation capacity, and intelligent automation ensure safety and consistent performance in any professional installation.