Acti 9 iINT simple green pilot

This Acti9 iIL is a single-phase voltage presence indicator light. The voltage is from 110VAC to 230VAC or from 110VDC to 130VDC. The red light on the front face lights up to indicate that there is voltage. The connection can be made with flexible copper wires or with ferrule wires from 0.5 mm² to 2 x 2.5 mm². The torque for the PZ1 screwdriver to connect the screw terminals is 1N.m. The connection can also be made with rigid copper wires of at least 0.5 mm² up to a maximum of 2 x 2.5 mm². It comes with stepped terminals to simplify the connection. The maximum LED light consumption per indicator light is 0.3W. The operating frequency is 50Hz or 60Hz. The lifespan of the LED indicator light is 100,000 hours of constant lightning efficiency. Due to the non-interchangeability of the LEDs, it is a maintenance-free device. The tropicalization is treatment 2 (relative humidity 95% at 55°C). The degree of protection is IP20. The pollution degree is 3. The width in 9 mm steps is 2. The dimensions are (W) 18mm x (H) 82mm x (D) 68mm. The weight is 65 g. The operating temperature is from -35°C to 70°C. The storage temperature is from -40°C to 80°C. This product complies with the IEC/EN 60947-5-1 standard.