Acti 9 iINT simple red pilot

This Acti9 iIL is a single-phase voltage presence indicator light. The voltage is from 110VAC to 230VAC or from 110VDC to 130VDC. The red light on the front face illuminates to indicate the presence of voltage. The connection can be made with flexible copper wires or with fiber cables from 0.5 mm² up to 2 x 2.5 mm². The torque for the PZ1 screwdriver to connect the screw terminals is 1N.m. The connection can also be made with rigid copper wires of at least 0.5 mm² up to a maximum of 2 x 2.5 mm². It comes with stepped terminals to simplify the connection. The maximum consumption of the LED indicator light per indicator is 0.3 W. The operating frequency is 50 Hz or 60 Hz. The lifespan of the LED indicator light is 100,000 hours of constant efficiency. Due to the non-interchangeability of the LEDs, it is a maintenance-free device. The tropicalization is Treatment 2 (relative humidity of 95% at 55 °C). The degree of protection is IP20. The pollution degree is 3. The width in frames of 9 mm is 2. The dimensions are (W) 18mm x (H) 82mm x (D) 68mm. The weight is 65g. The operating temperature is from -35 °C to +70 °C. The storage temperature is from -40 °C to +80 °C. This product complies with the IEC/EN 60947-5-1 standard.