Acti 9 iINT Single Red Pilot

This Acti9 iIL is a single-phase voltage presence indicator light. The voltage ranges from 110VAC to 230VAC or from 110VDC to 130VDC. The red light on the front face illuminates to indicate the presence of voltage. The connection can be made with flexible copper wires or fibre cables from 0.5 mm² up to 2 x 2.5 mm². The tightening torque for the PZ1 screwdriver to connect the screw connections is 1N.m. The connection can be made with rigid copper wires from a minimum of 0.5 mm² to a maximum of 2 x 2.5 mm². It comes with staggered terminals to simplify the connection. The maximum power consumption of the LED indicator light per indicator is 0.3 W. The operating frequency is 50 Hz or 60 Hz. The lifespan of the LED indicator light is 100,000 hours of constant efficiency. Due to the non-interchangeability of the LEDs, this is a maintenance-free device. The tropicalisation is Treatment 2 (95% relative humidity at 55 °C). The protection degree is IP20. The pollution degree is 3. The width in 9 mm pitches is 2. The dimensions are (W) 18mm x (H) 82mm x (D) 68mm. The weight is 65g. The operating temperature is from -35 °C to +70 °C. The storage temperature is from -40 °C to +80 °C. This product complies with the IEC/EN 60947-5-1 standard.