C60H Circuit Breaker 500V 2P 10A Curve C

The Acti9 60H-DC thermomagnetic circuit breaker by Schneider Electric is designed for direct current applications, ensuring protection against short circuits and overloads, as well as control and isolation. This product has 2 poles, a capacity of 10A, type C tripping curve, and a breaking capacity of 10kA 220V DC. This circuit breaker is an international offering worldwide and is dedicated to industrial control, automation, transport, and renewable energy applications. The switch features a green strip on the lever (VisiSafe) that ensures the opening of all poles under safe conditions (locked with a padlock) for interventions on active parts. Additionally, it has IP20 protection, can be mounted on a DIN rail, and is suitable for industrial isolation according to IEC 60947. This circuit breaker boasts an electrical durability of 3,000/6,000 cycles and mechanical durability of 20,000 cycles. It also has a wide operating range, functioning in temperatures from -25°C to 70°C. This product complies with IEC 60947-2 and RETIE standards. The Acti9 C60H-DC thermomagnetic circuit breakers carry the Green PremiumTM label, which promises compliance with the latest regulations, transparency on environmental impacts, circular products, and low CO2 levels. The operating voltage Ue is 500 V DC. The nominal insulation voltage Ui is 500 V DC. The rated impulse withstand voltage Uimp is 6 kV. The operating frequency is 50 Hz or 60 Hz. It can be mounted on a DIN segment. Its width is 4 parts of 9 mm. The pollution degree is 3. The overvoltage category is IV. The product colour is white (RAL9003). The weight is 0.256kg. According to IEC 60529, the protection rating is IP20 and IP40 in the enclosure. The operating temperature is -25 °C to 70 °C. The storage temperature is -40 °C to 85 °C.