Type 2 Transient Surge Protector Acti9 iPRD40r 3PN

This Acti9 iPRD40r surge arrester protects 3P+N installations. It allows for the quick replacement of damaged cartridges. This type 2 device is recommended for a high level of risk at the incoming distribution board. It offers remote reporting of the message to change the cartridge. It can be rotated to allow phase/neutral/earth cables to enter from the top or the bottom. The breaking capacity of the associated circuit breaker can go up to 50kA. It is compatible with TT and TN-S earthing systems. The maximum discharge current Imax is 40kA. The nominal discharge current In is 15kA. The maximum continuous operating voltage Uc in common mode is 260 VAC between neutral and earth, and 350 VAC between phase and earth. The maximum continuous operating voltage Uc in differential mode (between phase and neutral) is 350 VAC. The voltage protection level is 1.4 kV in common mode (N/PE) and differential mode (L/N). The unclassified service voltage is 230VAC or 400VAC. The operating frequency is 50Hz or 60Hz. The dimensions are (W) 72 mm x (H) 85 mm x (D) 69 mm. The width in 9 mm pitches is 8. The weight is 450g. The protection rating is IP20 and IP40 in a modular enclosure. The operating temperature is -25°C to 60°C. The storage temperature is -40°C to 85°C. This product complies with standards EN 61643-11 and IEC 61643-11.