Type 2 Transient Surge Protector Acti9 iPRD65r 3PN 65 kA

This Acti 9 iPRD65r transient surge protector safeguards 3P+N installations. It allows for quick replacement of damaged cartridges. This Type 2 device is recommended for main distribution boards with a very high risk. Transient surge protectors with the "r" indication feature a remote signalling contact: "replace the cartridge". It can be rotated to allow phase/neutral/earth cables to enter through the bottom or top. The breaking capacity Isc of the associated circuit breaker can reach up to 50 kA. This Acti 9 iPRD65r is compatible with TT and TN-S earthing systems. It has a maximum discharge current Imax of 65 kA. Its nominal discharge current In is 20 kA. The maximum continuous operating voltage Uc in differential mode DM (between phase and neutral) is 350 V AC. The maximum continuous operating voltage Uc in common mode CM (between neutral and earth) is 260 V AC. The voltage protection level Up in differential mode DM (between neutral and earth) is less than or equal to 1.5 kV. The voltage protection level Up in common mode CM (between neutral and earth) is less than 1.4 kV. The nominal voltage Un is 230 V AC or 400 V AC. The operating frequency is 50 or 60 Hz. Its dimensions are 72 x 85 x 69 mm (W x H x D). Its width in 9 mm pitches is 8. It weighs 450 g. The operating temperature range is -25 °C to +60 °C. The storage temperature range is -40 °C to +85 °C. The degree of protection is IP20. This product complies with IEC 61643-11: 2011 and EN 61643-11: 2012 Type 2 standards.