Type 2 Transient Surge Protector iPRD40 40KA 350V 3P+N

This Acti 9 iPRD40 transient surge protector safeguards 3P+N installations. It allows for quick replacement of damaged cartridges. This Type 2 device is recommended for main distribution panels with high risk. It can be rotated to allow phase/neutral/ground cables to enter from the bottom or top. The associated circuit breaker can have a breaking capacity Isc of up to 50 kA. This Acti 9 iPRD40 is compatible with TT and TN-S grounding systems. It has a maximum discharge current Imax of 40 kA. Its nominal discharge current In is 15 kA. The maximum continuous operating voltage Uc in differential mode DM (between phase and neutral) is 350 V AC. The maximum continuous operating voltage Uc in common mode CM (between neutral and ground) is 260 V AC. The protection level Up in differential mode DM (between phase and neutral) is less than or equal to 1.6 kV. The protection level Up in common mode CM and differential mode DM is less than or equal to 1.4 kV. The nominal voltage Un is 230 V AC or 400 V AC. The operating frequency is 50 or 60 Hz. Its dimensions are 72 x 85 x 69 mm (W x H x D). Its width in 9 mm steps is 8. It weighs 450 g. The operating temperature is from -25 °C to +60 °C. The storage temperature is from -40 °C to +85 °C. The protection rating is IP20. It weighs XX g. This product complies with IEC 61643-11: 2011 and EN 61643-11: 2012 Type 2 standards.