Acti9 iOF Auxiliary Contact 100mA to 6A AC-DC

This Acti9 electric auxiliary is a modular OC contact used as a remote indication for the position of the associated device. In the AC network, the rated current In is 100 mA to 6 A with an operating frequency of 50 Hz to 60 Hz at 240 V AC, and 100 mA to 3 A with an operating frequency of 50 Hz to 60 Hz at 415 V AC. In the DC network, the rated current In always starts at 100 mA from 24 V DC to 130 V DC. It rises to 6 A at 24 V DC, 2 A at 48 V DC, 1.5 A at 60 V DC, and 1 A at 130 V DC. It features 1 position switch with 1 C/O type contacts. It is designed for new or renovated installations in small businesses or buildings. This OC contact is compatible with Acti9 ranges such as iC60, iID, iDPN ARC, iDPN Vigi, iDPN Vigi ARC, iSW, iC40, iC40 ARC, iCV40, iCV40 Vigi ARC, iC40 XA, iCV40 XA, iC60 RCBO. This OC contact is compatible with Acti9 ranges such as Acti9 iDT40, iDT40 XA, and iDD40. The iOF is used for the short name of the device or for the compatibility code. It has a screw clamp terminal connection at the bottom. The connection allows the use of rigid copper wire. The cable cross-section capacity is 1 mm² to 4 mm². It has a screw clamp terminal connection at the bottom. The connection allows the use of flexible copper wire. The cable cross-section capacity is 0.5 mm² to 2.55 mm². It has a screw clamp terminal connection at the bottom. The connection allows the use of rigid copper wires (2 wires). The cable cross-section capacity is 2.5 mm². It has a screw clamp terminal connection at the bottom. The connection allows flexible connections with ferrule copper wires (2 wires). The cable cross-section capacity is 1.5 mm². The rated insulation voltage (Ui) is up to 500 V. It has a rated impulse withstand voltage (Uimp) of 4 kV. The width of the 9mm steps is 1.