ARGUS MASTER 2-CHANNEL Presence Detector

Presence detector for indoor ceiling mounting. The sensor module detects moving heat sources (e.g., people) within an adjustable detection area and initiates a stair timer. Suitable for resistive, inductive, and capacitive loads, such as incandescent lamps, energy-saving lamps, low-voltage halogen lighting with conventional transformers, electronic transformers, and fluorescent lamps. The sensor module is equipped with a light sensor with an adjustable brightness threshold, so the lighting only turns on when a specified brightness threshold is not reached. When there is sufficient natural light, the presence function allows the sensor module to turn off the lighting even when a person is present. For mounting in a flush-mounted box size 60 or in a surface-mounted box available as an accessory. With clip and screw fastening. With screw terminals. Functions: Switching of two outputs. External activation via two PL inputs (sensor module in the central unit (slave), Plus controller). Connection. Stair lighting function based on brightness with channel 1, stair lighting function independent of brightness with channel 2. Rated voltage: 220/230 V AC, 50/60 Hz. Rated current: max. 10 AX, cos phi 0.6. The total load on both channels cannot exceed 14 A. Outputs: 2 x NO contacts. Max. switching capacity per channel: Incandescent lamps: 2200 W. High-voltage halogen lamps: Low-voltage halogen lamps 2000 W with wound transformer: 500 VA Electronic transformers: 1050 W. Capacitive load: 10 A, 140 µF Low-energy lamps: 100 VA Motor load: 1000 VA Neutral conductor: mandatory (3-wire system). Cable range: max. 2 x 2.5 mm². Detection angle: 360°. Number of levels: 6. Number of