Heat recovery unit S&P CADB-HE-D12 ECOWATT left-horizontal

Heat recovery units CADB-HE-D 12 ECOWATT, with high-efficiency counterflow plate heat exchangers (up to 93%), certified by EUROVENT, mounted in white powder-coated galvanized steel boxes, double-walled with non-flammable thermal-acoustic interior insulation (M0) made of 25 mm thick fiberglass in the false ceiling versions (Models 04 to 21) and 50 mm in the roof installation versions (Models 40 and 54). Configurable inlet and outlet openings, versions for horizontal installation, and openings with airtight seals. Applications: Commercial premises, offices, hospitality, public buildings, schools. CADB/T-HE D ECOWATT: Heat recovery units without additional heating input. CADB/T-HE DC ECOWATT: Heat recovery units with built-in hot water battery. CADB/T-HE DI ECOWATT: Heat recovery units with built-in electric heating element. The 3-way regulation valve is supplied as an accessory. Motors: Models 04 to 21: EC motors with integrated electronic protection. IP44, class B. Models 40 and 54: Three-phase motors, Class F, IP55. Fans: Plug fans with backward-curved blades. The fans incorporated in the CADB/T-HE ECOWATT models comply with ErP regulations. Filters: F7: Low-loss F7 filters for air supply. M5: M5 filters for air extraction. Other data: Single-phase models (CADB-HE) and three-phase (CADT-HE). Flow rates from 400 to 5,400 m3/h at 150 Pa of static pressure available. All models and versions include internal by-pass. Interchangeable side panels allow for multiple combinations. Sizes CADB/T-HE 40 and 54 with integrated frequency inverter inside the unit (one inverter for each fan, allowing independent adjustment of supply and extraction flow rates).