SFA SANIVITE evacuation pump for kitchens and laundry rooms

The SFA SANIVITE evacuation pump, reference 0100700, is the perfect solution for adding domestic accessories such as kitchens and laundry rooms anywhere in the house, even in basements or attics. Thanks to its powerful pumping system, the SANIVITE allows the evacuation of wastewater from appliances such as sinks, dishwashers, and washing machines, without the need to be close to the main drainage of the house. This equipment is ideal for overcoming the technical limitations of traditional installations, where water needs to fall by gravity.

With the SFA SANIVITE, you can install a kitchen or laundry room in areas of the house that were previously impossible, such as a basement or an attic. This pump allows the evacuation of wastewater up to 5 meters in height or 50 meters in horizontal distance, providing great flexibility in the arrangement of installations. Its compact and efficient design makes it a versatile option for any expansion or renovation project.

This pump is designed to easily handle hot water generated by common household appliances, such as washing machines and dishwashers, which typically discharge water at high temperatures. In addition to its use in kitchens and laundry rooms, the SANIVITE is capable of evacuating gray water from a complete bathroom, including shower, sink, bidet, or bathtub, giving it great versatility.

The operating system of the SANIVITE is completely automatic. When the water level in the tank rises to 90 mm, the motor automatically activates to begin the evacuation of wastewater. This ensures efficient operation without manual intervention, providing convenience and reliability in any home environment.

The pump has four 40 mm diameter inlets, allowing for the connection of up to four devices simultaneously. Two of these inlets are located at the top of the unit and the other two at the lower side parts, facilitating a flexible installation tailored to the specific needs of the space. The included evacuation elbow is pre-equipped with a non-return valve, preventing backflow of water once evacuated, ensuring a safe and efficient outflow. It is recommended to use a 32 mm pipe for evacuation, although the system also supports 28 mm pipes.

In terms of performance, the SANIVITE is powered by a 400 W motor, allowing it to handle large volumes of water with ease. Its noise level is only 42 dB(A), making it a quiet option, ideal for residential spaces where noise can be a concern. Additionally, its IP44 protection rating ensures the safety of the device against moisture and the conditions typical of environments where evacuation pumps are installed.

Technical specifications of the SANIVITE:

• Number of inlets: 4 (two upper and two lateral)
• Diameter of inlets: 40 mm
• Recommended return diameter: 22/28/32 mm
• Motor consumption: 400 W
• Power supply voltage: 220-240V / 50Hz
• Electrical class: I
• Noise level: 42 dB(A)
• Maximum horizontal return: 50 meters
• Maximum vertical return: 5 meters
• Minimum activation height: 90 mm
• Minimum shower tray height: 15 cm

The SANIVITE not only stands out for its ability to handle large volumes of water and withstand high temperatures but also for its easy installation. With a compact design and a flexible mounting system, the pump can adapt to a wide variety of configurations, providing an efficient solution for kitchen and laundry renovation or expansion projects.

In summary, the SFA SANIVITE evacuation pump is a versatile and reliable option for managing wastewater from kitchens and laundry rooms, allowing these spaces to be installed in unconventional locations without relying on the proximity of the main drainage. Its ability to handle hot water, low noise level, and ease of installation make the SANIVITE an ideal choice for both homes and small businesses.