SFA SANIVITE Evacuation Pump for Kitchens and Utility Rooms

The SFA SANIVITE evacuation pump, reference 0100700, is the perfect solution for adding domestic features such as kitchens and utility rooms anywhere in the house, even in basements or attics. Thanks to its powerful pumping system, the SANIVITE allows you to evacuate wastewater from appliances like sinks, dishwashers, and washing machines, without needing to be near the main drain of the house. This equipment is ideal for overcoming the technical limitations of traditional installation, where water needs to fall by gravity.

With the SFA SANIVITE, you can install a kitchen or utility room in areas of the house that were previously impossible, such as a basement or an attic. This pump allows you to evacuate wastewater up to 5 metres in height or 50 metres horizontally, offering great flexibility in the layout of installations. Its compact and efficient design makes it a versatile option for any extension or renovation project.

This pump is designed to easily handle the hot water generated by common household appliances, such as washing machines and dishwashers, which often discharge water at high temperatures. In addition to its use in kitchens and utility rooms, the SANIVITE is capable of evacuating grey water from a complete bathroom, including shower, sink, bidet, or bathtub, which gives it great versatility.

The operation system of the SANIVITE is completely automatic. When the water level in the tank rises to 90 mm, the motor automatically activates to begin the evacuation of wastewater. This ensures efficient operation without manual intervention, providing convenience and reliability in any domestic environment.

The pump has four inlets with a 40 mm diameter, allowing you to connect up to four devices simultaneously. Two of these inlets are located on the top of the unit and the other two on the lower sides, facilitating a flexible installation suitable to the specific needs of the space. The included evacuation elbow is pre-equipped with an anti-return valve, preventing water from flowing back once evacuated, ensuring a safe and efficient outflow. It is recommended to use a 32 mm pipe for evacuation, although the system also supports 28 mm pipes.

In terms of performance, the SANIVITE is powered by a 400 W motor, allowing it to handle large volumes of water with ease. Its noise level is just 42 dB(A), making it a quiet option, ideal for residential spaces where noise can be a concern. Additionally, its IP44 protection rating ensures the apparatus's safety against moisture and the conditions typical of environments where evacuation pumps are installed.

Technical specifications of the SANIVITE:

• Number of inlets: 4 (two top and two side)
• Diameter of inlets: 40 mm
• Recommended return diameter: 22/28/32 mm
• Motor consumption: 400 W
• Power supply voltage: 220-240V / 50Hz
• Electrical class: I
• Noise level: 42 dB(A)
• Maximum horizontal return: 50 metres
• Maximum vertical return: 5 metres
• Minimum activation height: 90 mm
• Minimum shower tray height: 15 cm

The SANIVITE stands out not only for its ability to handle large volumes of water and withstand high temperatures but also for its easy installation. With a compact design and flexible mounting system, the pump can adapt to a wide variety of configurations, providing an efficient solution for kitchen and utility room renovation or expansion projects.

In summary, the SFA SANIVITE evacuation pump is a versatile and reliable option for managing wastewater from kitchens and utility rooms, allowing these spaces to be installed in unconventional locations without relying on proximity to the main drain. Its ability to handle hot water, low noise level, and ease of installation make the SANIVITE an ideal choice for both homes and small businesses.