SFA Sanicubic 2 VX S Smart Pumping Station

The SFA Sanicubic 2 VX S Smart pumping station is designed for the evacuation of wastewater in collective use facilities such as small buildings, professional premises, industrial kitchens, laundries, or technical installations with a high volume of black and gray water. This version with **Smart Control** system allows intelligent and safe management of the equipment, with cycle visualization, alarms, and operation history.

The equipment features **two powerful 2000 W motors** each, equipped with **vortex** turbines, allowing a free passage of solids up to 50 mm, without the need for grinding. The system reaches a flow rate of up to 40 m³/h and can lift water to a height of up to 13.5 m or a distance of 100 m. The pumps operate alternately to extend their lifespan but can work simultaneously if the system requires it.

The 120-liter tank is made of **glass fiber reinforced polypropylene (PP GF)** and features a compact design with an anti-sedimentation bottom and 5 multidimensional inlets (Ø40/50, 100/110/125 mm) and a DN90/110 evacuation outlet. Ventilation is carried out through a Ø75 mm connection. The lid is sealed, and the unit has an **IP68 protection rating**, allowing installation even in humid areas or areas exposed to splashes.

The **Smart Control panel**, included as standard, allows precise control of start, stop, and alerts. Water level detection is performed via a **pneumatic** system, and the station has a wired alarm that informs of faults or level excesses. The entire system has been designed for continuous and reliable operation even under intensive use conditions.

Included Components

• 120-liter tank in glass fiber reinforced PP
• 2 pumps with 2000 W vortex turbine each
• Smart Control panel with display
• Pneumatic detection system and wired alarm
• Evacuation elbow with pre-installed non-return valve

Technical Specifications

• Turbine type: Vortex
• Power supply voltage: 230 V (single-phase)
• Frequency: 50-60 Hz
• Absorbed power (P1): 2000 W (per pump)
• Useful power (P2): 1400 W (per pump)
• Operating mode: S3 30% (intensive intermittent)
• Protection rating: IP68

Hydraulic Data

• Maximum head height: 13.5 m
• Maximum flow rate: 40 m³/h
• Inlet diameter: Ø40/50/100/110/125 mm
• Evacuation diameter: Ø90/110 mm
• Ventilation diameter: Ø75 mm
• Total volume: 120 L
• Useful volume: 26 L
• ON/OFF level: 165 mm / 95 mm
• Alarm level: 235 mm
• Solid passage: up to 50 mm
• Maximum pumped liquid temperature: 70 °C

Identification and Logistics

• Gross weight of the set: 101 kg
• EAN code: 3308815076171
• Reference: CUBIC2XLVXSMART

Main Advantages

• Automatic evacuation of black and gray water in communities
• 2 vortex pumps with free passage of solids up to 50 mm
• Smart Control panel with advanced diagnostics and management
• Direct floor installation, no pit required
• Compact, watertight, and immersion-resistant tank (IP68)

Optional Accessories

• DIN 40 shut-off valve: Ref. VANNEDN50
• DIN 110 shut-off valve: Ref. VANNEDN100
• Ø75 active carbon filter: Ref. FILTRECUBICXLSFA

The SFA Sanicubic 2 VX S Smart pumping station is a powerful, automated, and ready-to-install solution for projects requiring safe and continuous wastewater evacuation in professional, collective, or high-volume installations.