SFA SANIFOS 610 2 SLD 700 T Pumping Station

The SFA Sanifos 610 2 SLD 700 T pumping station is a high-performance technical solution for rainwater evacuation in commercial, residential, or industrial environments. Equipped with a 610-liter tank and two Sanipump SLD 700 three-phase submersible pumps with a bichannel impeller, this station ensures high flow rates and continuous operation with reliability and safety.

The system allows the evacuation of up to 35 m³/h of rainwater with solids up to 50 mm in diameter, reaching a head height of up to 14 meters. The pumps operate alternately, activating simultaneously in high water level situations. Operation is automatically managed via level switches.

The Smart Control panel, included as standard, allows monitoring and programming of the system from its digital screen. It provides information on evacuation cycles, incidents, and maintenance reminders. Ideal for installations where system reliability and traceability are essential.

The 610-liter tank is made of high-density polyethylene (HDPE), with a bottom designed to prevent sedimentation. It features a hermetically sealed screw cap resistant to up to 200 kg of point load. Its useful volume is 100 liters, optimized for efficient pumping cycles.

The station includes a complete pre-assembled hydraulic kit with non-return valves and shut-off valves for each pump, stainless steel lifting chains, and seals to facilitate connection. It can be installed with an additional extension module if greater depth or frost protection is required.

Included Components

• 610-liter HDPE tank with anti-sedimentation bottom
• 2 Sanipump SLD 700 three-phase pumps with bichannel impeller
• Smart Control panel with display and alarms
• Hydraulic kit with non-return valve and shut-off valve per pump
• 2 connection seals (DN50 and DN100)
• 2 stainless steel chains

Technical Specifications

• Type of pump: SLD 700 three-phase with bichannel impeller
• Power supply voltage: 400 V (three-phase)
• Operating mode: Automatic with alternation and simultaneity
• Detection: Level switches

Hydraulic Data

• Maximum head height: 14 m
• Maximum flow rate: 35 m³/h
• Inlet diameter: Ø50/100 mm
• Discharge diameter: Ø63 mm
• Ventilation diameter: Ø75 mm
• Solids passage: up to 50 mm

Tank and Dimensions

• Total volume: 610 liters
• Useful volume: 100 liters
• ON/OFF level: 470 mm / 50 mm
• Alarm level: 570 mm
• Lowest/highest entry point: 325 / 670 mm
• Maximum liquid temperature: 70 °C
• Gross weight of the set: 120 kg

Main Advantages

• Intensive rainwater evacuation with dual three-phase pump
• Bichannel impeller with solids passage up to 50 mm
• Smart Control panel for programming, alarms, and event logging
• Impact-resistant, odor-proof, and easy-access tank
• Ready-to-use installation with complete hydraulic system

Optional Accessories

• Wired alarm: Ref. 009FOS280AL
• Sanifos 610 extension module (40 cm): Ref. RO250100

The SFA Sanifos 610 2 SLD 700 T pumping station is the most robust and efficient solution in the range for rainwater evacuation in installations requiring continuous performance, high capacity, and automated management. Ideal for technical projects demanding durability, power, and traceability.