Three-Phase Pumping Station SFA Sanicubic 2 SC4.0 T

The SFA Sanicubic 2 SC4.0 T pumping station is designed for the evacuation of large volumes of wastewater from residential buildings, offices, or commercial facilities. Thanks to its two powerful three-phase pumps of 4000 W (P2) each and single-channel turbines, it efficiently evacuates liquids with solid load in installations that require high flow and medium lift height.

This model reaches a maximum flow rate of 140 m³/h and a head height of up to 13 meters. The pumps operate alternately to optimize their lifespan, although they can also work simultaneously if the flow demands it. They are made of GG-20 cast iron, with a free passage for solids up to 80 mm, allowing effective treatment of wastewater with a high solid content.

The Sanicubic 2 SC4.0 T incorporates a 1000-liter tank made of high-density polyethylene (PE HD), with a useful volume of 500 liters. It features a DN 150 inlet for connecting general downpipes and a DN 100 outlet for pressurized evacuation. Ventilation is also done through a DN 100 connection.

The system activates automatically thanks to a pneumatic pressure switch that detects the liquid level in the tank, preventing prolonged storage. The included ZPS 2 control panel allows recording of operating cycles, configuring start/stop/alarm levels, and managing possible incidents through visual and acoustic signals.

Included Components

• 1000 L tank in PE HD (useful volume: 500 L)
• 2 cast iron pumps of 4000 W with single-channel turbines
• DN 150 inlet, DN 100 evacuation and ventilation
• External ZPS 2 control panel with sound and visual alarm
• Non-return valves and connection fittings included

Technical Specifications

• Motor type: Three-phase (400 V, 50-60 Hz)
• Absorbed power (P1): 5500 W (per pump)
• Useful power (P2): 4000 W (per pump)
• Operating mode: S3 25%
• Protection index: IP68
• Maximum head height (HMT): 13 m
• Maximum flow rate: 140 m³/h
• Solid passage: up to 80 mm
• Maximum pumped liquid temperature: 55 °C

Connections and Installation

• Inlet: DN 150
• Evacuation: DN 100
• Ventilation: DN 100
• Detection type: Pneumatic pressure switch
• Gross weight: 385 kg

Main Advantages

• Dual high-flow pump with alternating or simultaneous activation
• Large capacity tank for intensive use
• Direct floor installation without excavation work
• Total control via ZPS 2 electronic panel
• Ideal for collective evacuations of buildings or commercial premises

Compatible Optional Components

• DIN 110 shut-off valve: Ref. VANNEDN100
• Active carbon filter DN 100: Ref. FILTRECUBICXLSFA

The SFA Sanicubic 2 SC4.0 T pumping station offers an excellent combination of evacuation capacity, robustness, and ease of installation. A complete solution for evacuation installations that require high flow with safety and automated control.